Home

Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

PCB Term Blk, 3.50mm, 13 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 0.3-60A / 480Y/277V AC, 50/60Hz Also DC rated 480Y/277V AC0.3-25A: 1 pole - 42V DC; 2 Pole - 80V DC30-60A: 1 pole - 24V DC; 2 Pole - 60V DC 10kA Short Circuit Withstand Capacity Applications Include: AC Motor Starting, Across the Line, AC General Use,AC Resistance, AC Discharge Lamps...

OKA/KU Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Yellow/Red Handle For use with 4 Pole KU switch No. of auxiliary switches: 1Environmental Rating(UL): UL Type 4X; (IEC):...

DIN Term Blk, Push-In, Feed-Thru30A, 600V, 24-10AWG, 6mm, green< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Spring, Feed-Thru.20A, 600V, 24-10AWG, 6mm, yellow< Product photo color will vary depending on part number selection.DATA SHEET

Mushroom Push-Turn Small - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push...

Warning Label< Product photo can vary depending on part number selection.DATA SHEET

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

RU-440V - Undervoltage Trips for Manual Motor StartersFor use with - Manual Motor Starters (MMS Series)DATA SHEET < Product photo may vary depending on part number selection.

EFD 22 LED SeriesModular Fuse HolderIEC Type Fuse HoldersDATA SHEET< Product photo may vary depending on part number selection.

Green Lens Module  Click for Data Sheet < Product photo may vary depending on part number selection.

Oscilloscope Test ProbeTKO 5 - PMS 221A DATA Sheet Link < Product photo may vary depending on part number selection.

O-Ring for Corrugated TubesThe O-ring must be mounted into the first groove of the conduit. The conduit with its pre-mounted sealing ring, must be inserted into the SEM gland and simply twisted into the end

50 Terminal, Solder Connection, 35 mm DIN Rail or optional panel mounting*

DIN Term Blk, Screw, Fuse, LED10A, 600V, 24-10AWG, 6mm, blue< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

Enclosure, Polystyrene, Gray, Metric knockouts

A-Coded, LED, 3-pin/ 3-wire, 3x24AWG, PVC cable, black

Female, D-Coded, Brass, 16x1.5mm thread, PCB, Shielded

Liquid tight strain relief - cable gland for PG13.5 thread.  Click for Data Sheet or  Click for Full Catalog< Product photo may not be exact.

Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

PCB Term Blk, 3.50mm, 14 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 0.3-60A / 480Y/277V AC, 50/60Hz Also DC rated 480Y/277V AC0.3-25A: 1 pole - 42V DC; 2 Pole - 80V DC30-60A: 1 pole - 24V DC; 2 Pole - 60V DC 10kA Short Circuit Withstand Capacity Applications Include: AC Motor Starting, Across the Line, AC General Use,AC Resistance, AC Discharge Lamps...

OKA/KU Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Yellow/Red Handle For use with 4 Pole KU switch No. of auxiliary switches: 2Environmental Rating(UL): UL Type 4X; (IEC):...

DIN Term Blk, Push-In, Feed-Thru30A, 600V, 24-10AWG, 6mm, orange< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Spring, Feed-Thru.20A, 600V, 24-10AWG, 6mm, white< Product photo color will vary depending on part number selection.DATA SHEET

Mushroom Push-Turn Small - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push...

Warning Label< Product photo can vary depending on part number selection.DATA SHEET

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

RU-480V - Undervoltage Trips for Manual Motor StartersFor use with - Manual Motor Starters (MMS Series)DATA SHEET < Product photo may vary depending on part number selection.

EFD 22 LED SeriesModular Fuse HolderIEC Type Fuse HoldersDATA SHEET< Product photo may vary depending on part number selection.

Green Lens Module  Click for Data Sheet < Product photo may vary depending on part number selection.

Oscilloscope Test ProbeTKO 2,5 - PML 711A DATA Sheet Link < Product photo may vary depending on part number selection.

O-Ring for Corrugated TubesThe O-ring must be mounted into the first groove of the conduit. The conduit with its pre-mounted sealing ring, must be inserted into the SEM gland and simply twisted into the end

50 Terminal, Pluggable Connection, 35 mm DIN Rail or optional panel mounting*