×

Home

2AP2 Projecting Momentary - Non-Illuminated Metal Operator

2AP2
Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

1P18U1/26 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/26
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

P35ULT - Power Feed Lug

P35ULT
Electrical rating: 115A/600V AC/DC Wire Ranges: 14-2 AWG Cu Wire Temperature Rating: 75°C Required Torque: 4Nm (35.4 lb. in.) Material of Lug: Brass Insulation Material: Polyamide For use with: UL489 1, 2, 3 Phase Busbar

MMS-63H-32A Manual Motor Starter

MMS-63H-32A
MMS-63H-32A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38674 - 1 - Pole 175A Plated aluminum Power Distribution Block

38674
Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Plated Aluminum BodyDATA...

51.655R - FM1...U Compact, one pedal foot switch with foot guard

51.655R
51.655R - FM1...U Compact, one pedal foot switch with foot guard Standard FeaturesHousing: Black ABS body with a variety of pedal colors Protection Level: IP 43 and IP 65 Switch Insert: Snap action microswitch, UL/CSA approvedElectrical Rating: 5A/125-250V AC (If used with appropriate cable, see cable chart on page 29) Contact Types:...

Brown CY4/DB Terminal Block

CY4/DB
DIN Term Blk, Screw, Feed-Thru.30A, 600V, 24-10AWG, 6mm, brown< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B50X50S/W

B50X50S/W
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

MLK1311-3,5-H

MLK1311-3,5-H
PCB Term Blk, 3.50mm, 11 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

2AP3 Projecting Momentary - Non-Illuminated Metal Operator

2AP3
Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

1P18U1/27 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/27
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

P50UT-LP - Power Feed Lug

P50UT-LP
Electrical rating: 115A/1000V AC/DC Wire Ranges: 10-1/0 AWG Cu Wire Temperature Rating: 60°C Required Torque: 5.6Nm (50 lb. in.) Material of Lug: Brass Insulation Material: PolyamideFor use with:UL1077/508 18 and 25sqmm1 phase Busbar

MMS-63H-40A Manual Motor Starter

MMS-63H-40A
MMS-63H-40A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38075 - 3 - Pole 125A Plain Brass Power Distribution Block

38075
Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Plain Copper alloyDATA...
Product added to wishlist
Product added to compare.

This site uses Cookies.